Mark's Auto Lockout Services

Save money and print it yourself or make it and sell it to a fishing bubby for some profit! Print everything under $5.00.

Both Planer Boards are here: Left and Right

Dimensions 1: 190mm X 89mm X 15.5mm (7.5 inches X 3.5 inches x 1/2 inch)

Dimensions 2: 190mm X 101mm X 15.5mm (7.5 inches X 4 inches x 1/2 inch)

Yes, I added another size that is 1/2 inch taller. You can print this on a Ender 3.

All the files are here and ready to print. I added more files then what you may need.

As far as weights. I made this for 2 gram weight beads, qty: 20 or more, about 7mm or less round will fit. Total weight should be about 49 grams. I did not have a long weight to see if it would fix but you can try and let me know if I need to abject the size of the place where they go.

The Cover holds the beads weights in, and cover the Insulating foam.

==================================

What you will need from Amazon:

• VictorsHome 1mm x 300mm 304 Stainless Steel Round Rod, Metal Solid Shaft Rods Lathe Bar Stock for DIY Crafts Model Car Helicopter Airplane 10pcs

• FUNORNAM Heavy Tension Snap Release Clips for Kites Planer Board Downrigger Trolling Fishing
  OR
  Baoblaze 2~10pcs Snap Weight Release Clip Planer Board Downrigger Release Clips, Pin in Pad - 6pcs

• ABN Compression & Extension Spring 200 pc Assortment Set, Heavy-Duty Steel Wire – Metal Tension Springs Replacement Kit (Spring needed is: 5/16 inch x 1-1/8 inch, Extension)

• DYWISHKEY 1220 PCS M2 M3 M4 M5, 304 Stainless Steel Hex Button Head Cap Bolts Screws Nuts Washers Assortment Kit with Hex Wrenches (Screws needed are: M3 x 12, M3 x 8, M4 x 12 or M4 x 16)

=======================================

What you will need from your local hardware store:

• 1/2 in. x 3.5 in. x 5.5 in. R-1.93 Insulating Sheathing Foam

=======================================

I am always trying to make this easier to build without buying stuff that you only need a part of, like the Eye screw. I made the eye screw attachments in 3d.

Any questions, just ask.

Print Settings:

Rafts: Yes.

Supports: Yes.

Resolution: 0.2

Infill: 50% or higher

Filament brand: Any

Filament color: Yellow

Filament material: PETG (ONLY)