error: Content is protected !!

foto1
foto1
foto1
foto1
foto1

Mark's Auto Lockout Services

2011 to 2015 FORD EDGE

2011 to 2015 FORD EDGE W/ POWER LIFTGATE

OR

2011 to 2015 FORD EDGE W/O POWER LIFTGATE

 

Need this key blank for this to work: H92-PT

Add Duplicate Key (Requires two working keys)
1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) for at least 3 seconds, but no more than 10 seconds, and then back to OFF.
3. Remove the existing key, and within 10 seconds insert a second key, turning it ON (RUN) for at least 3 seconds, but no more than 10 seconds and then back to OFF.
4. Remove the second key, and within 20 seconds, insert the new, un-programmed key into the ignition cylinder.
5. Turn the new key to ON (RUN) for at least 6 seconds and then turn back to OFF.
6. The security light will illuminate for up to 3 seconds to indicate that the new key has been successfully programmed. A flashing security light will indicate unsuccessful programming.
7. If the key has been successfully programmed, it will start the vehicle's engines as well as operate the remote entry system.

 

 

Click to listen highlighted text!